EVCS180x Evaluation Board Family

EVCS180x Family


Hall Effect Linear Current Sensor Evaluation Boards

The EVCS180X-S-Y-00A Evaluation Board is designed to demonstrate the capabilities of MPS’ current sensor IC MCS180XGS-Y series. The MCS180XGS-Y current sensor is a high accuracy, Hall effect-based linear current sensor IC for AC or DC current sensing. The Hall array is differential to cancel out any stray magnetic field. The IC series provides two different power supply (3.3V/5V), six full current ranges of 5A to 50A to get best accuracy in different application fields. The output voltage is proportional to the applied current flow through primary conductor. The galvanic isolation between the pins of the primary conductive path and the sensor leads allows the MCS180XGS-Y to replace optoisolators or other expensive isolation devices.

Features:

  • 5V/3.3V Supply Voltage
  • 5A to 50A Primary Applying Current
  • Immune to external magnetic field
  • 0.9 mΩ Internal Conductor Resistance
  • 100kHz Maximum Bandwidth
  • 4 μs Minimum Output Rise Time
  • 2.4 kVRMS Minimum Isolation Voltage

Applications:

  • Motor ControlAutomotive Systems
  • Load Detection & Management
  • Switched-mode Power Supplies
  • Over-current Fault Protection

 

EVCS180x Evaluation Board Family

Part No

VCC

[V]

Opt. Primary Current Range

[A]

Typ. Sensivity

[mV/A]

EVCS1800-S-12-00A 3.3

±12.5

110
EVCS1800-S-25-00A 3.3 ±25 55
EVCS1801-S-12-00A 5

±12.5

160
EVCS1801-S-25-00A 5 ±25 80
EVCS1802-S-05-00A 3.3 ±5 264
EVCS1802-S-10-00A 3.3 ±10 132
EVCS1802-S-20-00A 3.3 ±20 66
EVCS1802-S-30-00A 3.3 ±30 44
EVCS1802-S-40-00A 3.3 ±40 33
EVCS1802-S-50-00A 3.3 ±50 26.4
EVCS1803-S-05-00A 5 ±5 400
EVCS1803-S-10-00A 5 ±10 200
EVCS1803-S-20-00A 5 ±20 100
EVCS1803-S-30-00A 5 ±30 66
EVCS1803-S-40-00A 5 ±40 50
EVCS1803-S-50-00A 5 ±50 40

Downloads:

EVCS180X-S-Y-00A datasheet

MCS180x Family Current Sensors Brochure.pdf

This item is online not available. Please use the request option for a contact.

Go back